Yamaha Commercial Audio
6.0 UTILITY
The UTILITY button provides access to the following functions:
Mute Group Masters
Tap Tempo
Press the [UTILITY] button on the left side of the Mixer window to enter this
mode.
To exit from the UTILITY mode, press the [UTILITY] button, another mode
button, or any bank in the "Navigation/Meter Bridge".
6.1
MUTE GROUP MASTERS
8 buttons are provided to function as Master switches for the console's Mute
Groups. Press [MUTE GROUP X] to mute channels assigned to that Mute
Group. The button will appear red (or orange) when a group is muted.
The channel [ON] buttons in the Mixer Window will blink to indicate that a
channel has been muted as part of a Mute Group.
Note: assignment of channels to Mute Groups must be done in the console.
6.1.1 Mute Group Dim Level
Normally, when a channel is muted, its level is reduced to minus infinity.
Alternatively, Mute Groups in CL series consoles can cause channels
to have their levels dimmed rather than completely muted.
The DIM indicator next to each Mute Group Master button displays the
status of Mute Group dimming. If this indicator displays "–Inf", then
CL StageMix V3.0 User Guide
Page 26