Dca Faders - Yamaha CL3 User Manual

Yamaha Commercial Audio
If the Pan Link function is active for the currently active Stereo Mix Bus,
a link icon will appear below the Pan slider. When Pan Link is active,
adjusting a channel's Pan slider will affect the Pan parameter for that
channel to the Master Stereo Bus and all other linked Stereo Mix
Busses.
Note: Pan Link mode for each Stereo Mix Bus can only be activated in
the console, not from StageMix.
To exit "SENDS ON FADERS" mode, press the [SENDS ON FADERS] button
in the left column.
4.10

DCA FADERS

Press the [DCA 1-8] or [DCA 9-16] button to access the console's 16 DCAs. A
green LED will appear next to each DCA fader when it is set to exactly 0dB.
DCA faders can be quickly set to exactly 0dB by double-tapping on the fader if
the relevant Preference is On in the Setup screen (refer to 8.8).
Press the [DCA 1-8] or [DCA 9-16] button again to exit the DCA fader bank
and return to the previously selected bank. Alternatively, press any bank in
the "Navigation/Meter Bridge" to directly access that fader bank.
CL StageMix V3.0 User Guide
Page 17