Eq On; Eq Reset; Eq Type - Yamaha CL3 User Manual

Yamaha Commercial Audio

5.2.3 EQ ON

The channel EQ can be switched on/off with the [EQ ON] button
towards the top-right of the EQ screen. It is green when the EQ is on.
When the EQ is switched off, the EQ curve will be grey.

5.2.4 EQ RESET

The [RESET] button above the EQ curve allows the EQ to be reset to
either its Default values or to Flat. After pressing [RESET], an "Are You
Sure?" popup will be displayed before the action is executed.
 Selecting "Default EQ" will reset all EQ parameters for the selected
channel back to their default values, including HPF.
 Selecting "Flatten EQ" will set the Gain of bands 1-4 to 0dB, but will
not change the Q and Frequency values.
 Select "No" to cancel and exit this function.

5.2.5 EQ TYPE

The default EQ Type for every PEQ is Type I. This can be changed to
Type II by pressing the [II] button at the top of the EQ editing screen.
To exit from the EQ window and return to the Mixer window, press the
[MIXER] button at the top-right of the display.
CL StageMix V3.0 User Guide
Page 22