Sound System; Multichannel Tv Sound(Mts) And Hi-Fi Audio - Aiwa VX-S135U Operating Instructions Manual

Multichannel TV Sound
(MTS) and Hi-Fi audio sound
system
Number
buttons
MENU —
AUDIO —
SET/TRACKING —
+1–
— TV VCRICATV
— CHANNEL A/V
— .REC/OTR
— ENTER
Multichannel TV Sound (MTS)
This unit is equipped with the MTS (Multi-channel TV
Sound) system which decodes stereo and SAP (Second
Audio Program) broadcasting signals. It also decodes the
stereo TV sound of the local CATV system if it satisfies the
assigned cable frequencies and ElA-recommended MTS
stereo/bilingual TV sound system.
it can record and play back the audio signal in the VHS Hi-Fi
audio sound system.
Second Audio Program (SAP)
This unit can record and play back a Second Audio Program
(SAP) for the second language or additional information.
Usually primary language is recorded on the primary sound
channel, and the second language or additional information
is recorded on the SAP channel.
Audio track system
This unit records a regular monaural audio signal on the
normal audio track, and stereo Hi-Fi audio signal on the Hi-
Fi audio track.
If you use the unit equipped with the VHS Hi-Fi audio sound
system to play back the tape recorded on this unit, you can
enjoy stereo Hi-Fi sound or bilingual program. If you use the
unit not equipped with the VHS Hi-Fi audio sound system,
only a regular audio sound recorded on a normal audio track
is played back.
<Tape strudu rea.
Monaural sound
-::::d:::k
Before starting
.
.
1
2
3
4
5
6
7
Insert a cassette and select the tape speed.
Set the TV VCRICATV selector to TV VCR.
Press MENU.
Press SET/lRACKING +/– to select TV SET-UP, then
press ENTER.
MENU
!IJIMER REC SET
tiW SET-UP
hkH SET-UP
I AUTO REPEAT ON >OFF
m SYSTEM SET-UP
<+/-/ ENTEMENU>U>
Press SET/TRACKING +/- to select SAP.
I
TV SET-UP
V-CHIP SET
ON/O FF TIMER
PICTURE
HAUDIO
~~A P ON FOFF
<+/-/ ENTEMENU>U>
Press ENTER to select ON.
I
TV SET-UP
nV-CHIP SET
ON/OFF TIMER
fi PICTURE
@#UDIO
m6AP *ON OFF
[~
<+/-/ ENTEMENU>U>
Press MENU twice to return to the normal screen.
Press CHANNEL
A/V
or the number buttons to
select the channel number to record.
STEREO andlor SAP appears on the TV screen
depending upon the receiving program.
Press . REC/OTR.
Recording begins.
To listen to the SAP sound on the TV
'
Follow the steps 1 through 5. The SAP sound will be heard.
To return to the primary sound, select OFF in step 4.
Hi-Fi sound and
video signals
Recording the Hi-Fi audio
The regular audio signal and Hi-Fi audio signal are
automatically recorded if the TV program is broadcasted in
stereo. No special setting is required for Hi-Fi audio
recording.
31
ENGL/SH