Preliminary Cleaning; Initial Burn-In; Subsequent Cleaning; Time Of Day - NEFF U1644N0 Operating And Fitting Instructions Manual

Preliminary
cleaning

Initial burn-in

Subsequent cleaning

Time of day

Setting the time
Take the accessories out of the oven.
Remove all packaging remnants, e.g. polystyrene
parts, from the oven.
1.
Clean the appliance exterior with a soft
moistened cloth.
2.
Remove the shelf supports and telescopic rails
from the oven.
3.
Clean the oven and the accessories with a hot
detergent solution.
Please observe the operating instructions
furnished with the hob.
Before using the appliance for the first time, you
must set the time on the electronic clock.
Heat the empty oven for approx. 30 minutes.
Select top and bottom heat at a setting of 240° C.
Clean the oven with a hot detergent solution.
Install the shelf supports and telescopic rails.
After connecting to the mains, or after a power
0:00
failure, the display
>
Press the button and set the current time with
the rotary knob (e.g.
To correct the time, press the
symbol flashes.
Then set the time.
Note: The time cannot be corrected if an automatic
function or the timer has been set (to cancel see
"Electronic clock").
will blink.
15:00
hours).
>
button until the
13