Download Print this page

Interface Unit - Omron ZX-GT Datasheet

Smart laser micrometer
Hide thumbs Also See for ZX-GT:

Advertisement

Interface Unit

Item
Compatible Controller
Indicator
Communications port
12-bit binary output
(D11 toD0, GATE)
Power supply voltage
Dielectric strength
Insulation resistance
Ambient temperature
Ambient humidity
Vibration resistance(durability)
Degree of protection
Cable length
Material
Weight (packed state)
Accessories
4
ZX-GIF11/-GIF11A
ZX-GTC11
Power ON (green), Controller communications (orange), Controller communications error (red), RS-
232C communications (orange), RS-232C communications error (red), binary output (orange)
RS-232C (9-pin D-sub connector)
NPN open-collector output
30 VDC 20 mA max.
Residual voltage 1.2 V max.
Supplied from Controller (power consumption: 60 mA max.)
1,000 VAC, 50/60 Hz for 1 min
20 MΩ (at 500 VDC megger)
Operating: 0 to +50°C Storage: -15 to +60°C (with no icing or condensation)
Operating and storage: 35 to 85% (with no condensation)
10 to 150 Hz Single-amplitude: 0.35 mm for 80 min each in X, Y and Z directions
IEC60529 IP20
RS-232C 0.5 m, binary output 2 m
Case: PBT (polybutylene terephthalate), Cover: Polycarbonate
ZX-GIF@1A: Approx. 550 g
ZX-GIF@1: Approx. 330 g
ZX-GIF@1A: Setup Software (CD-ROM), 2 clamps, Instruction Sheet
ZX-GIF@1: 2 clamps, Instruction Sheet
ZX-GTC41
PNP open-collector output
30 VDC 20 mA max.
Residual voltage 2 V max.
Displacement sensors / Width-measuring Sensors
ZX-GIF41/-GIF41A

Advertisement

loading

This manual is also suitable for:

Zx-gt28s11Zx-gt2840s11Zx-gt28s41Zx-gt2840s41