Omron WIRED REMOTE I-O System Manual page 113

Specifications
C200H Remote I/O Slave Units
---
Power supply voltage
Allowable fluctuations in supply volt-
age.
DC output terminal
Power consumption
Weight
RUN Output
Power output capacity
Number of transmission words
Remote Terminals
Power consumption**
Weight
RUN Output
Diagnostic functions
**Power consumption is given with all Remote Terminal and I/O Block points ON.
104
C200H-RT201
100/110 or 200/240 VAC (switchable)
50/60 Hz
85 to 132 or 170 to 264 VAC
24 VDC +10%/–20%, 0.3 A max.
100 VA max.
1.3 kg max.
Closed during operation
Contact capacity:
2 A max. at 250 VAC (cos
0.5 A max. at 250 VAC (cos
2 A max. at 24 VDC
3 A max. at 5 VDC (actual output to I/O Units: 2.7 A max.)
10 per Slave
200 mA input/500 mA output max. at 24 VDC
250 mA input/800 mA output max. at 12 VDC
250 g max.
G6B relay (closed during operation)
Contact capacity:
2 A max. at 250 VAC or 24 VDC (cos
Transmission error checks BCC and reversed transmission verification
CPU Unit error monitoring
C200H-RT202
24 VDC
20.4 to 26.4 VDC
None
80 W max.
1.3 kg max.
= 1)
= 0.4)
= 1)
Appendix B