Validity; Use; Copyright - Omron SENSOR SUPPORT SOFTWARE S3 Operation Manual

Validity

1-1 Validity
1-2

Use

1-3

Copyright

1-3-1 Proprietary right
1-3-2 Liability
6
These operating instructions apply only in connection with the operating
instructions of a sensor belonging to the E3NT type series.
Read the sensor's operating instructions completely and conscientiously. All
information that is important to working with sensors in the E3NT type series
can be found in the ABBO 0017 operating instructions.
Pay attention to all safety notes that are contained in the sensor's oper-
ating instructions.
The SensorSupportSoftware S
series and is only capable of operating in connection with these sensors.
For copyright reasons, these operating instructions must not be modified,
amended or shortened.
By using the SensorSupportSoftware S
provisions:
The software and data are the property of OMROM or its suppliers. Sale and
forwarding of the software or its data for commercial purposes are not permit-
ted.
It is not permitted to modify, alter or shorten the software or its data. In partic-
ular, the name OMRON must not be removed. It is not allowed to add data
within the software package.
® ®
MICROSOFT , MS , MS-DOS
trademarks.
OMRON does not assume any warranty for the correctness and complete-
ness of software and data; liability for damages resulting from defective soft-
ware and data is rules out.
In all cases, OMRON's liability is limited to the amount that the customer has
actually paid for this product.
In particular, OMRON does not assume any liability for damages or data loss
on PCs/laptops as the result of the use of the SensorSupportSoftware S
the connection of the optical data interface.
© Copyright 2001 OMRON. All rights reserved.
3
serves to set sensors in the E3NT type
3
, you acknowledge the following
® ®
, Pentium and WINDOWS
Section 1-1
®
are registered
3
or