Omron SENSOR SUPPORT SOFTWARE S3 Operation Manual page 47

Display window for new sensor settings New settings of E3NT-L
8-2-3-1 Application remarks
8-2-3-2 Display at sensor
8-2-3-2-1 Type of display
8-2-3-2-2 Rotating the display by 180°
8-2-3-2-3 Economy mode
In the Application remarks box, you can enter remarks that are saved
together with the settings.
When the file is read again, the remarks again appear in the Application
remarks box.
The type of display on the sensor can be set in the Display at sensor box.
The following display formats are available for selection in the pulldown
menu of this box:
• Display in m
The current sensing distance is displayed in m on the sensor's display.
• Display of column
The current sensing distance is displayed on the sensor's display as a bar
graph
• Display rotated checkbox
When this checkbox is marked, the display on the sensor's display is
rotated by 180°.
This function may be useful when the sensor if fitted in certain positions.
• Economy mode checkbox
When this checkbox is marked, the sensor's display mode is set to the
energy saving mode.
In the energy saving mode, the display switches off automatically approx-
imately 5 minutes after the last time a push button has been pressed on
the sensor.
Section 8-2
47