Buzzer Sound; Backlight; Calendar Check - Omron NSJ CONTROLLERS - 03-2008 Operation Manual

PT Settings
8-3-4

Buzzer Sound

Note
1,2,3...
8-3-5

Backlight

1,2,3...
8-3-6

Calendar Check

The buzzer is used at times such as when a command from the host is
received or an error occurs. This function is set to ON or OFF in the System
Menu.
ON: Buzzer turns ON when a command is received from the host or an
error occurs.
OFF: Buzzer is OFF.
ERR ON: Buzzer turns ON only when an error occurs.
The default setting is ERR ON.
(1) Other commands and settings associated with the buzzer exist, but the
settings here have the highest priority.
(2) When the buzzer is set to ON or ERR ON, the buzzer will be heard when
messages are displayed with a cross (X) or exclamation mark (!) icon.
(3) Refer to 2-18 Special Functions in the NS-Series PT Programming Man-
ual (V073) for details on the buzzer function.
Set the buzzer to ON/OFF by using operations from the PT Tab Page in the
System Menu, as follows:
1. Select either ON, OFF, or ERR ON for the buzzer setting.
2. After setting, press the Write Button to save the setting.
This function sets the backlight brightness to one of three levels.
The default setting is high.
Set the brightness of the backlight by using operations from the PT Tab Page
in the System Menu, as follows:
1. Select one of the three backlight brightness levels to set to high, middle, or
low.
2. After setting, press the Write Button to save the setting.
This function displays the time and date of the internal system clock in the
Display Section.
The factory settings for the date and time are not correct.
When the time and date are set, the time and date in the Controller Section
are also changed.
Section 8-3
143