Omron NSJ CONTROLLERS - 03-2008 Operation Manual page 158

Operating Modes and System Menu
4. Password Tab
Item
Level 1
Level 2
Level 3
Level 4
Level 5
Password mode
Time Out
Timeout (min)
Switch Screen when can-
celing the authentication
Switch Screen No.
5. Comm Tab
Item
Comms. Auto-return
Timeout interval
Retry Counts
Serial Port A
Serial Port B
Expansion Interface
Ethernet
Controller Link
6. Data Check Tab
Item
Screen Number
Show Address
7. Special Screen Tab
Item
Alarm History
Operation Log
Error Log
Special Functions
System Version
8. Hardware Check Tab
Item
LCD Check
Touch Switch Check
Changes the level 1 password.
Changes the level 2 password.
Changes the level 3 password.
Changes the level 4 password.
Changes the level 5 password.
Selects the normal password function or the password function with levels.
Specifies whether user authentication is automatically canceled after a set time
has elapsed.
Sets the timeout time.
Specifies whether the screen is switched automatically when authentication is
canceled.
Sets the screen number that is displayed when authentication is canceled.
Selects whether automatic recovery is used when a communications error
occurs.
Sets and displays the timeout monitor time.
Sets and displays the number of communications retries.
Sets and displays whether serial port A is used, the communications method,
and other details.
Sets and displays whether serial port B is used, the communications method,
and other details.
Sets and displays the connector used by serial port B (Not used for the NSJ
Controller only).
Sets and displays whether Ethernet is used and communications details.
Sets and displays whether Controller Link is used and communications details
(Not used for the NSJ Controller only).
Sets the screen number that is displayed as a sample.
Displays the communications addresses set in the sample display.
Displays the alarm history screen.
Displays the screen for recording the operation log.
Displays the screen for recording the error log.
Displays the NSJ Troubleshooter, device monitor screen, and communications
test screen. Also used to execute ladder monitoring, for Memory Card transfers,
to display a USB device lists, to displaying capture data, and to display PLC data
trace results.
Displays the version display screen.
Checks the LCD.
Checks the touch switches.
Function
Function
Function
Function
Function
Section 8-1
Page
Page 150
Page 150
Page 150
Page 150
Page 150
Page 151
Page 151
Page 151
Page 151
Page 151
Page
Page 152
Page 152
Page 152
Page 152
Page 152
Page 152
Page 156
Page 157
Page
Page 159
Page 159
Page
Page 161
Page 162
Page 163
Page 163
Page 170
Page
Page 172
Page 172
127