Omron NQ HMI Getting Started Manual page 56

Example application
4-3-6 Buttons
42
Buttons are used to assign tasks. The following buttons are available:
• Predefined buttons (
Buttons to which predefined single tasks can be assigned..
• Advanced bit button (
Free configurable bit buttons with feedback option. The following behaviour
can be programmed: press (rising edge), pressed (high) and released
(falling edge).
• Word button ( )
Buttons that can be configured on 32 states referenced to the value of the
used tag defined for each state. Different tasks and messages can be
assigned to each state of a word button.
The most important properties for buttons, advanced bit buttons and word
buttons are as follows:
• Button Style
• On Text
• On Text Colour
Proceed as follows:
1 Click on Screen3.
2 Click Word Button (
(Pressing the space bar will allow you to enter text directly.)
3 Click Collection from State Properties in the property panel.
4 Click Add State.
5 Click ... from Tasks List in the property panel.
6 Click Add.
)
).
Figure 4.18: Word button
Section 4-3
)