Omron NQ HMI Getting Started Manual page 39

Using NQ-Designer
Register Tag name
S0010 RTC day
S0011 RTC month
S0012 RTC year
S0013 RTC hour
S0014 RTC min
S0015 RTC sec
S0016 RTC day of the week
S0017 Scan time register
S0018 Communication recover
time[s] for port1
S0020 Driver scan time register
for port1
S0023 Popup screen trigger
register
S0116 Fact_Appln_1
S0117 Fact_Appln_2
S0118 Fact_Appln_3
S0119 Fact_Appln_4
S0120 Fact_Appln_5
S0121 Contrast control
(Retentive register)
S0122 Brightness control
(Retentive register)
S0123 Fact_Appln_6
S0124 Fact_Appln_7
S0125 Fact_Appln_8
/i
Table 4.4: Default system tags (Bit)
Register Tag name
S0003_00 Logger memory full status Read
S0003_01 Logger memory clear
status
Read/Write Description
Read RTC day in integer format
Read RTC month in integer format
Read RTC year in integer format
Read RTC hour in integer format
Read RTC minute in integer format
Read RTC second in integer format
Read RTC day of week in integer
format
Read Shows time required to
execute screen, screen task
and global task in millisecond.
Use ####.## format for
display.
Read/Write Shows time in seconds to
recover the communication
with failed nodes for port1. The
default value is 60 sec.
Read Shows time required to
execute screen blocks in
milliseconds. Use ####.##
format for display.
Read/Write Holds the screen number for
the pop-screen that will be
shown when bit s20 bit is set.
Read/Write Reserved
Read/Write Reserved
Read/Write Reserved
Read/Write Reserved
Read/Write Reserved
Read/Write This retentive register used for
setting the contrast of the NQ-
Series.
Read/Write This retentive register used for
setting the brightness of the
NQ-Series.
Read/Write Reserved
Read/Write Reserved
Read/Write Reserved
Read/Write Description
1: full memory
Read 1: memory clear is
being executed
Section 4-2
25