Omron NQ HMI Getting Started Manual page 107

A-3-3 NQ with AB DF1 Driver to AB SLC Series
To perform a successful communication proceed as follows.
1 Right-click the Nodes folder and click Add....
2 Set all data as shown in the screenshot.
3 Create PLC Integer tag with address N007000.
4 Add a Numerical Data Entry object with tag address N007000 on screen1.
5 Download the application and firmware to the NQ-Series.
6 Open RS Logix500.
7 Click Channel Configuration on File menu.
8 Set all data as shown in the screenshot.
93