Omron NQ HMI Getting Started Manual page 54

Example application
4-3-5 Display data objects
40
Proceed as follows:
1 Right-click on Screens folder in project panel.
2 Click New Base Screen (
3 Click on Screen2.
4 Click Numerical Data Entry (
Note Right lower field shows explanation of field selected in property box.
Display data objects are used to display:
• numerical data
• message data
• bit data
The most important properties for numerical data are as follows:
• Tag Address
• Tag Name
• Data Type
The most important properties for message data are as follows:
• Ranges
• On Text
• Tag Address
• Colour/Flash/Visibility Animation
The most important properties for bit data are as follows:
• Off Text
• On Text
• Tag Address
• Colour/Flash/Visibility Animation
).
).
Figure 4.15: Data entry objects
Section 4-3