Reset; Reset Types; Reset Type And Ne0A-Series Controller Status; Procedure For Resetting - Omron DeviceNet Safety NE0A Series Operation Manual

Reset

7-6

Reset

7-6-1

Reset Types

Reset type
Emulate cycling power
Return to the default configu-
ration, and then emulate
cycling power.
(Initialize all data.)
Return to the default configu-
ration except to preserve the
following parameters, and
then emulate cycling power.
(Retain specified data.)
7-6-2

Reset Type and NE0A-series Controller Status

Note
7-6-3

Procedure for Resetting

1,2,3...
Note
The Network Configurator can reset the NE0A-series Controller in the follow-
ing three ways. A password is required to enter reset.
The configuration
Settings before the Same as before reset. Log before the reset
reset are retained.
Initialization Flashing red and
green. (Waiting for
(Default)
configuration.)
Depends on user Depends on user
specifications. specifications.
The configuration includes local I/O settings, logic settings, network numbers,
and passwords. The NE1A-series Controller stores this data in its nonvolatile
memory. Some information, however, cannot be changed once it is set. Select
the corresponding reset type to return the information to the default parameter
settings.
Depending on the reset type and NE0A-series Controller's status, reset might
not be possible.
Reset type
Emulate cycling power
Return to the default configuration,
and then emulate cycling power.
Return to the default configuration
except to preserve the following
parameters, and then emulate
cycling power.
Resetting is not possible after safety I/O communications have been started.
1. Right-click on the device on the virtual network that is to be reset, and se-
lect Reset from the pop-up menu.
2. In the Device Reset Window, input the reset type and the device password.
For details on errors that occur during resets, refer to SECTION 12 Trouble-
shooting.
MS indicator Error history
is retained.
Initialized.
(All data cleared.)
Initialized.
(All data cleared.)
NE0A-series Controller's status
Configuration lock
- LOCK indicator lit.
Able to reset
Unable to reset
Unable to reset
Section 7-6
Maintenance data
Values before reset
are retained.
Values before reset
are retained.
Values before reset
are retained.
Configuration lock
- LOCK indicator
flashing.
Able to reset (See note.)
Able to reset (See note.)
Able to reset (See note.)
99