Omron DeviceNet Safety NE0A Series Operation Manual page 75

Creating a Virtual Network
Setting the Network
Number Automatically or
Manually
Automatic setting
(default)
IMPORTANT Set a unique network number for each network. If connections are made to
Acquiring Network
Numbers
50
EtherNet_1
#00
DeviceNet_1
#01 #02
Network number: 1
The Network Configurator sets the network number automatically, so it is nor-
mally not necessary to change this setting. Using the manual setting is recom-
mended, however, if virtual networks will be created on different computers.
The Network Configurator automatically
generates a number based on the date and time.
more than one network with the same network number, the system may oper-
ate unpredictably.
The network number can be acquired from the actual network in the following
two ways:
✓
Acquire the network number along with the overall network configura-
tion by uploading the network.
✓
Acquire only the network number by clicking the Get from the actual
network Button on the Network Property Dialog Box.
#03 #01
Right-click
Set a unique value for each network.
Section 6-2
#00
DeviceNet_2
#02 #03
Network number: 2
Manual setting