Table of Contents
Advertisement
Safety embedded;
ISO 13849-1, cat 3
Dual contactors at the output of the
inverter are no longer required.
Direct connection to a safety
controller ensures compliance to ISO
13849-1, cat 3.
...0% risk!
Safety is embedded in the MX2, according to ISO 13849-1,
Cat 3, with two safety inputs and an External Device
Monitoring (EDM) output.
No external contactors on the motor side are required,
meaning simpler wiring for the user.
Safety redundancy input
EDM output
EDM monitoring output
An External Device Monitoring (EDM)
output confirms the safety status of
the inverter, saving you the cost and
wiring of external devices to carry
out the same function.
Dual safety input chain
EDM safety output chain
Direct integration into the
safety circuit
MX2 inverters can fit easily into the
safety circuit. The safety inputs can
be linked from one inverter to
another without additional safety
relays.
Advertisement
Table of Contents
