Terminal Arrangement - Omron H3CR Manual

■ Terminal Arrangement

Note: The delayed contact of conventional Timers was indicated as
The contact symbol of the H3CR-A is indicated as
11-pin Models
H3CR-A/-A-300/-A-301 (Contact Output)
H3CR-AS (Transistor Output)
Note: Terminals 1, 3, 4, and 8 are empty. Terminals 2, 5, 6, 7, and 10
are the same as for the H3CR-A.
H3CR-AP (Contact Output)
Power supply
Note: 1. Terminal 5 is empty.
2. Separate power supplies can be used for the Timer and in-
puts.
10
Solid-state Multi-functional Timer
because its operating mode is six multi-modes (four multi-modes for the H3CR-A8).
Power supply
Power supply
H3CR-A
8-pin Models
H3CR-A8/-A8-301 (Contact Output)
Power supply
H3CR-A8S (Transistor Output)
Power supply
Note: Terminals 1, 3, 4, and 5 are empty. Terminals 2 and 7 are the
same as for the H3CR-A8.
H3CR-A8E (Contact Output)
Power supply