Terminal Cover - Omron H3CR Manual

■ Accessories (Order Separately)
Adapter, Protective Cover, Hold down Clip, Setting Ring and Panel Cover
Name/specifications
Flush Mounting Adapter
Protective Cover
Hold-down Clip (Sold in sets of
two)
Setting Ring A
Setting Ring B and C
Panel Cover
*1 The Y92A-48B Protective Cover and the Y92P-48G@ Panel Cover can not be used at the same time with the Y92F-73/-74 Flush Mounting Adapter.
*2 The Y92A-48B Protective Cover is made from hard plastic. Remove the Protective Cover to change to set value. The Y92F-73/-74 Flush
Mounting Adapter and the Y92P-48G@ Panel Cover cannot be used at the same time with Y92A-48B Protective Cover.
*3 The Y92S-27/-28 Setting Ring cannot be used alone. It must be used together with the Y92P-48G@ Panel Cover.
*4 The Y92A-48B Protective Cover and the Y92F-73/-74 Flush Mounting Adapter cannot be used at the same time with the Y92P-48G@ Panel Cover.
Sockets
Timer
Pin
11-pin
8-pin
Note: 1. The P2CF-@@-E has a finger-protection structure. Round crimp terminals cannot be used. Use forked crimp terminals.
2. The P3GA-11 and P3G-08 Socket can be used together with the Y92A-48G Terminal Cover to implement finger protection.
3. For details, refer to your OMRON website.

Terminal Cover

Application
For back connecting socket
Note: For details, refer to your OMRON website.
For PF085A Socket
For PL08 or PL11 Sockets
Light gray (5Y7/1)
Black (N1.5)
Connection
Front Connecting
Back Connecting
Front Connecting
Back Connecting
Models
Y92F-30
Y92F-73 *1
Y92F-74 *1
Y92A-48B *2
Y92H-8
Y92H-7
Y92S-27 *3
Y92S-28 *3
Y92P-48GL *4
Y92P-48GB *4
Round Sockets
Terminal
DIN track mounting
DIN track mounting
(Finger-safe type)
Screw terminal
Solder terminal
Wrapping terminal
PCB terminal
DIN track mounting
DIN track mounting
(Finger-safe type)
DIN track mounting
Screw terminal
Solder terminal
Wrapping terminal
PCB terminal
Model
Y92A-48G
H3CR-A
Models
P2CF-11
P2CF-11-E
P3GA-11
PL11
PL11-Q
PLE11-0
P2CF-08
P2CF-08-E
PF085A
P3G-08
PL08
PL08-Q
PLE08-0
Remarks
For P3G-08 and P3GA-11
4