Timing Chart; H3Cr-A/-As/-Ap; Operation - Omron H3CR Manual

Operation

■ Timing Chart

Note: 1. The minimum power-opening time ("Rt") is 0.1 s.
2. The minimum input pulse width (for start, reset) is 0.05 s.
3. The letter "t" in the timing charts stands for the set time and "t–a" means that the period is less than the time set.
4. Power supply start in mode J is also possible for H3CR-A8/-A8E/-A8S/-A8-301 models.
5. Refer to page 19 for application examples.

H3CR-A/-AS/-AP*

*H3CR-AP model incorporates start input only.
Operating
mode
A: ON-delay
Power
Start
Reset
Output relay (NC)
Output relay (NO)
(Output indicator)
Power indicator
B:
Flicker OFF
Power
start
Start
Reset
Output relay (NC)
Output relay (NO)
(Output indicator)
Power indicator
B2:
Flicker ON
Power
start
Start
Reset
Output relay (NC)
Output relay (NO)
(Output indicator)
Power indicator
C:
Signal ON/
OFF-
Power
delay
Start
Reset
Output relay (NC)
Output relay (NO)
(Output indicator)
Power indicator
t t
Timing chart
Basic operation
Power
Start
(See note)
Output
Note: Start input is invalid while the
Timer is in operation.
Basic operation
Power
Start
(See note)
Output
Note: Start input is invalid while
the Timer is in operation.
Basic operation
Power
Start
(See note)
Output
Note: Start input is invalid while the
Timer is in operation.
Basic operation
Power
Start
(See note)
Output
Note: Start input is valid and re-
Solid-state Multi-functional Timer
t
t t t t
t t t t
t t t
triggerable while the Timer is
in operation.
H3CR-A
t
13