Checking Possible Errors - Omron G3PW - MANUAL 2 User Manual

Checking Possible Errors

7-1 Checking Possible Errors
Troubleshooting
Check Flow When There Is No Output
Check the output value (OUT) on the 7-
segment display.
Check for problems in the input signal
wiring.
Check whether the duty setting (DUTY)
is 0.0.
Check whether the output upper limit
(OLU) is 0.0.
Check whether the Input Signal Type
[P04] setting is correct.
Check whether the Main Setting
Automatic/Manual Default [P08] setting is
correct.
Check whether the Main Setting
Automatic Input Selection [P05] setting is
correct.
Check whether the Communications Main
Setting Number [P25] setting is correct.
88
Output occurs.
(value not 0.0)
No output occurs (value is 0.0).
No problem
The setting
is 0.0.
The setting is
not 0.0.
The setting
is 0.0.
The setting is
not 0.0.
The setting is correct.
The setting is correct.
Automatic input
The communications
input is correctly set.
Check for problems in the load
wiring.
Increase the duty setting.
Increase the output upper limit.
Manual input
Check whether the Main Setting Manual
Input Selection [P06] setting is correct.
Section 7-1