Omron G3PW - MANUAL 2 User Manual page 57

Procedures for Operation and Setting Parameters
Setting Parameters in the Initial Setting Level
p 0
1
(Press the DOWN Key 11 times.)
p 1
2
(Press the DOWN Key 16 times.)
p 2 8
1,2,3...
42
ENT
ADJ SET EV
RST
The set value will be displayed.
ENT
RST
ENT
ADJ SET EV
RST
Press the ENT/RST Key to
ENT
enter the set value and return to
RST
the previous display.
a b
ENT
ADJ SET EV
RST
ENT
RST
1. Press the UP and DOWN Keys to select the parameter that is to be set
from External Duty Input Enable/Disable parameter [P01] to Initialize Set
Values parameter [P28].
2. Press the ENT/RST Key to display the parameter set values.
3. Use the UP and DOWN Keys to change a set value. When the UP or
DOWN Key is pressed, the display will start flashing.
4. Press the ENT/RST Key to enter the setting and return to the previous pa-
rameter (External Duty Input Enable/Disable parameter [P01] to Initialize
Set Values parameter [P28]).
0
ADJ SET EV
Press the ENT/RST Key to
enter the set value and to return
to the previous display.
0
ADJ SET EV
t
i
ADJ SET EV
Press the ENT/RST Key to initialize
the setting and return to the
previous display.
Section 4-5
1
ADJ SET EV
The set value is changed by
pressing the UP and DOWN
Keys. The display will flash.
2 0
ADJ SET EV
The set value is incremented or decremented by
pressing the UP or DOWN Key. Holding down
the key changes the set value more quickly.
n
i
ADJ SET EV
When the UP Key is pressed, the INI
(initialization) display will flash.