3 Setting Up a Single-axis Servo System
3-7
Confirming System Operation
Confirm that the system is operating correctly.
Place the CPU Unit online with the Sysmac Studio before you perform the procedures that are given in
this section.
3-7-1
Checking for Controller Errors
The color of the ERR/ALM indicator in the Controller Status Pane of the Sysmac Studio shows the
presence of any errors. If ERR/ALM is red, an error has occurred. Follow the instructions that are given
below to check the details of the error.
1
Click the
The Detailed View of the Controller Status Pane is displayed.
2
Use one of the following methods to open the Troubleshooting Window.
Method 1: Select Troubleshooting from the
Tools Menu.
Method 2: Click the
bar.
3-32
Button on the Toolbar of the Controller Status Pane.
Indicates a Controller error.
Button on the Tool-
NJ/NX-series Startup Guide for Motion Control (W514)