Mounting The Controller; Mounting To Din Track - Omron F150-3 - MANUAL 1 Setup Manual

Mounting the Controller

2-9

Mounting the Controller

2-9-1

Mounting to DIN Track

PFP-M End Plate
(OMRON)
Connecting to the Two-camera Unit
The Vision Mate Controller can be mounted to DIN Track or a
flat surface.
The Vision Mate Controller can be easily mounted to or
removed from 35-mm DIN Track.
The following DIN Tracks are available from OMRON.
Model
PFP-100N 1 m
PFP-50N 50 cm
PFP-100N2 1 m
Install the Two-camera Unit to the left of the F150 using the
Camera Unit Cable (15 cm).
Section 2-9
DIN Track
Length
27