Omron F150-3 - MANUAL 1 Setup Manual page 18

Installation Precautions
INCORRECT
Ambient Temperature
Noise Resistance
Do not install the Controller in the orientations shown in the
following diagram.
1. Maintain a minimum clearance of 50 mm above and below
F150 components to improve air circulation.
2. Do not install F150 components immediately above strong
heat sources, such as heaters, transformers, or large-ca-
pacity resistors.
3. Do not let the ambient operating temperature exceed
50°C.
4. Provide a forced-air fan or air conditioning if the ambient
temperature might exceed 50°C.
Control box
Louver
Use the following measures to help increase noise resistance.
1. Do not install F150 components in a cabinet containing
high-voltage equipment.
Section 1-1
3