Specifications - Omron EJ1G Datasheet

■ Accessories (Order Separately)
Current Transformer (CT)
Diameter
5.8 dia. E54-CT1
12.0 dia. E54-CT3
G3ZA Connecting Cable
Cable length
5 m EJ1C-CBLA050
Rail Mounting Equipment
Name
Mounting Rail PFP-100N
PFP-50N

Specifications

Basic Unit/EJ1G-TC
■ Ratings
Item Type
Power supply voltage
Operating voltage range
Power consumption
Input (See note.)
Input impedance
Control Voltage output
outputs
Transistor output ---
Number of input and control
points
Setting method
Ambient temperature range
Ambient humidity range
Note: Inputs are fully multi-input. Therefore, platinum resistance thermometer, thermocouple, infrared thermosensor, and analog input can be
selected.
2
Modular Temperature Controller for Gradient Temperature Control
Model
Model
Model
EJ1G-TC4
24 VDC
85% to 110% of rated voltage
5 W max. (at maximum load)
Thermocouple:
ES1B Infrared Thermosensor:
Analog input:
Platinum resistance thermometer: Pt100, JPt100
Current input: 150 Ω max., voltage input: 1 M Ω min.
Output voltage: 12 VDC ± 15%, max. load current: 21 mA (PNP models with short-circuit protection circuit)
Input points: 4, Control points: 4
Via communications
Operating: − 10 ° C to 55 ° C, Stored: − 25 ° C to 65 ° C (with no icing or condensation)
Operating: 25% to 85% (with no condensation)
CX-Thermo Support Software Ver. 3.1
Model
EST2-2C-MV3
Note: CX-Thermo Support Software version 3.2 (available soon) is
required to set the EJ1G Modular Temperature Controller for
Gradient Temperature Control.
USB-Serial Conversion Cable
Model
E58-CIFQ1
4 W max. (at maximum load)
K, J, T, E, L, U, N, R, S, B, W, PLII
10 to 70 ° C, 60 to 120 ° C, 115 to 165 ° C, 140 to 260 ° C
4 to 20 mA, 0 to 20 mA, 1 to 5 V, 0 to 5 V, 0 to 10 V
Max. operating voltage: 30 V, max. load current: 100 mA
Input points: 2, Control points: 2
EJ1G
EJ1G-TC2