Using The Internal Clock (Cs1 Cpu Units Only) - Omron CJ - PROGRAMMING MANUAL 12-2009 Programming Manual

Using the Internal Clock (CS1 CPU Units Only)

1-2

Using the Internal Clock (CS1 CPU Units Only)

Key Sequence
Initial display
The internal clock of the CPU Unit is set to "00 year, 01 month, 01 day (00-01-
01), 00 hours, 00 minutes, 00 seconds (00:00:00), and Sunday (SUN)" when
the Battery Set is mounted in the CS-series CPU Unit.
When using the internal clock, turn ON the power supply after mounting the
Battery Set and 1) use a Programming Device (Programming Console or CX-
Programmer) to set the clock time, 2) execute the CLOCK ADJUSTMENT
(DATE) instruction, or 3) send a FINS command to start the internal clock from
the correct current time and date.
The Programming Console operation used to set the internal clock is shown
below.
FUN SHIFT MON
↑
0
CHG
↓
Specify: Yr Mo Day Hr Min S
Section 1-2
WRITE
Data
5