Operating Procedures - Omron CJ - PROGRAMMING MANUAL 12-2009 Programming Manual

Using File Memory
Programming
Console address
+136 EM File Memory
Starting Bank
Related Special Auxiliary Relay
Name
EM File Memory Starting Bank
5-3-2

Operating Procedures

Memory Cards
Using a Programming Device
1,2,3...
The following table shows the corresponding settings when using a Program-
ming Console.
Name
0000 Hex: None
0080 Hex: Starting at bank No. 0
008C hex: Bank No. C
The EM area starting from the specified bank num-
ber will be converted to file memory.
Address
A344
1. Insert a Memory Card into the CPU Unit.
Description
Description
The bank number that actually starts the EM file
memory area at that time will be stored. The EM file
from the starting bank number to the last bank will be
converted to file memory. FFFF Hex will indicate that
there is no EM file memory.
Memory Card
Section 5-3
Initial setting
0000 Hex
255