Omron A16 Datasheet page 17

Dimensions
Note: All units are in millimeters unless otherwise indicated.
■ Lighted/Non-lighted Pushbutton Switches without Voltage Reduction
Unit
The lamp terminal is also provided with non-lighted models.
Solder terminals and tab terminals (#110) can be both used with Lighted and Non-lighted Pushbutton Switches.
Rectangular
A16@-J
Solder terminals (tab terminals #110)
Square
A16@-A
Solder terminals (tab terminals #110)
Rectangular
A16@-3J
Solder terminals (tab terminals #110)
Lamp terminal
Lock ring
Mounting nut Lamp terminals
Packing (t0.5)
(for oil-resistant IP65 only)
Lamp terminals
Lock ring
Mounting nut Lamp terminals
Packing (t0.5)
(for oil-resistant IP65 only)
Lamp terminals
Lock ring
Mounting nut
Lamp terminals
Packing (t0.5)
(for oil-resistant IP65 only)
Panel Cutouts
See page 25 for panel cutouts
+0.2
16 dia.
24 min.
0
Panel Cutouts
See page 25 for panel cutouts
+0.2
16 dia.
0
19 min.
19 min.
Panel Cutouts
See page 25 for panel cutouts
16 +0.2 dia. 24 min.
0
A16
Pushbutton Switch
19 min.
19 min.
G-21