Omron 2D CODE READER User Manual page 104

Sample Programming for CJ-series PLC Using a Hardware Trigger
With the following programming, the results of reading using a hardware trigger will be
stored in DM200 to DM220.
A392.06
Reception
Completed
Flag
This programming example assumes that the read data is 20 digits or less.
@BSET(071)
Clears the data from DM200 to
#0000
DM220. (A392.06 automatically turns
ON when data is sent from the
D200
V400-F.)
D220
RXD(235)
Stores the data sent from the V400-F
D200
starting from DM200.
#0000
A393
END(001)
V400-F050/250/350
Appendix
103
User's Manual