Parkside PSB 1050 A1 - MANUAL 3 Manual page 9

½
If the inserted tool jams, switch off the
electrical power tool immediately.
½
Always keep the device clean, dry
and free of oil or grease.
½
When carrying out work during which
the insertion tool could hit hidden
power cables or the power cable of the
appliance itself, hold the appliance by
the insulated handling surfaces.
½
Keep your workplace clean and tidy.
½
Wait until the electrical tool has come
to a standstill before putting it down.
©
Caution utility services!
DANGER! Ensure that you do not strike
electrical cables, gas or water pipes when
you are working with the electrical power
tool.
©
Original accessories /
attachments
Use only the accessories and attachments
detailed in the operating instructions.
©
Before first use
WARNING!
DANGER OF INJURY!
©
Mounting or adjusting
the additional handle
NOTE:
NOTE:
©
Using the depth stop
©
Inserting tools
Quick-action drill chuck / spindle lock: