Introduction; Proper Use; Features And Equipment - Parkside PPHSS 730 - MANUEL 4 Operating And Safety Instructions Manual

Introduction

the following icons / symbols are used in this instruction manual:
Read instruction manual!
Observe caution and safety notes!
Caution – electric shock!
Dangerous electric current – danger
to life!
Explosive material!
V ~
Voltage
W
Watts (Effective power)
Pendulum-action jigsaw PPHSS 730
Introduction
Q
Please make sure you familiarise your-
self fully with the way the device works
before you use it for the first time and
that you understand how to handle electrical pow-
er tools correctly. To help you do this please read
the accompanying operating instructions. Keep
these instructions in a safe place. If you pass the
device on to anyone else, please ensure that you
also pass on all the documentation.

Proper use

Q
The device is suitable for making straight, curved
and bevel cuts in blocks or sheets of plastic, wood
and metal. The device is designed to be used in
dry rooms and for domestic purposes only. Ob-
serve the advice about saw blade types. Any
other use or modification to the device shall be
considered as improper use and could give rise to
considerable dangers. The manufacturer will not
26 GB/MT
Safety class II
Wear hearing protection, dust
protection mask, protective glasses
and protective gloves.
Keep children and other unauthorised
personnel at a safe distance when
using electrical tools.
Keep the device away from rain or
moisture. Water entering an electrical
device increases the risk of electric shock.
Damaged appliances, power cables
and power plugs mean potentially
fatal risks from electric shock. Regularly
check the condition of the appliance,
the power cables and the power plugs.
Dispose packaging and appliance in
an environmentally-friendly way!
accept liability for loss or damage arising from
improper use.

Features and equipment

Q
Pommel grip
1
On / OFF switch (with stop)
2
Housing
3
Oscillation speed setting wheel
4
Mains connection lead
5
Ventilation grill
6
Dust extraction spout
7
Vacuum extraction duct (see Fig. B)
8
Base plate, light metal
9
Runner (removable)
10
Clamp screw
11
Pendulum action switch
12
Guide roller
13
Saw blade
14
Guide fence openings (with locking screws)
15
Chip guard
16
Contact guard
17
Quick-release chuck
18
Guide fence
19
Allen key
20
Stop pin (see Fig. B)
21