Sennheiser SYSTEM 2015 Instructions For Use Manual page 36

Hide thumbs Also See for SYSTEM 2015:
Table of Contents

Advertisement

88
Getting into the configuration menu
Note:
In order to get into the configuration menu, the transmitter or receiver
must be switched off.
Press the
SET
button
Press the
ON/OFF
seconds. "SETUP" appears on the display.
Press the
SET
button
Selecting a menu
Press the
/
rocker button (UP/DOWN) to select a menu.
Press the
SET
button to get into the setting mode of the selected menu.
The current setting that can be adjusted flashes on the display.
Adjusting a setting
Press the
/
rocker button (UP/DOWN) to adjust the setting.
By briefly pressing the
forwards or backwards to the next setting. In the "FADE", "TUNE",
"NAME" and "ACCESS" menu, the
"fast search" function: If you hold down the
display cycles continuously, allowing you to get fast and easily to
your desired setting. The new setting flashes on the display until it
is stored.
and keep it pressed.
button
and keep it pressed for approx. five
to get into the configuration menu.
/
rocker button, the display jumps either
/
rocker button features a
or
button, the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mikroport system 2015

Table of Contents