Activating/deactivating the lock mode
The transmitter has a lock mode that prevents accidental programming or
switching the power off during operation. However, you can still mute the
microphone.
Press the
SET
button
Press the
button (DOWN)
mode is activated and the lock mode icon
display.
To deactivate the lock mode, press the
pressed.
Press the
button (DOWN)
lock mode is deactivated and the lock mode icon
standard display.
Displaying the frequency
You can display the frequency stored in the selected channel. If you operate
your system on one of the channels with a freely selectable frequency
(channel bank "U"), this feature is very important as it allows you to check
if transmitter and receiver are set to the same frequency.
Press the
SET
button
Press the
button (UP)
.
. "LOCK" appears on the display. The lock
SET
button
. "UNLOCK" appears on the display. The
and keep it pressed.
. The current frequency is displayed.
appears on the standard
again and keep it
disappears from the
77