Sennheiser SYSTEM 2015 Instructions For Use Manual page 27

Hide thumbs Also See for SYSTEM 2015:

Table of Contents

After switching on the transmitter, the name of the transmitter is first dis-

played. After approx. three seconds, the standard display appears.

Getting into the operating menu

Press the

SET

button to get from the standard display into the opera-

ting menu. The last selected menu flashes on the display.

Selecting a menu

Press the

rocker button (UP/DOWN) to select a menu.

Press the

SET

button to get into the setting mode of the selected menu.

The current setting that can be adjusted flashes on the display.

Adjusting a setting

Press the

rocker button (UP/DOWN) to adjust the setting.

By briefly pressing the /

forwards or backwards to the next setting. In the "SENSIT" and

"CHAN" menu, the

function: If you hold down the

continuously, allowing you to get fast and easily to your desired

setting. The new setting flashes on the display until it is stored.

rocker button, the display jumps either

rocker button features a "fast search"

button, the display cycles

Table of Contents

Mikroport system 2015