Indications And Displays On The Transmitter - Sennheiser SYSTEM 2015 Instructions For Use Manual

Indications and displays on the transmitter

Battery status indication
The 4-step battery status display
provide information on the capacity of the BA 2015 battery pack or the bat-
teries:
3 segments:
2 segments:
1 segment:
Battery status display
and red LED flashing:
MUTE indication
The red LED lights up constantly when the microphone of the transmitter
is muted.
Audio peak indication
The yellow LED should only light up briefly during peak level passages.
When it lights up constantly, the line or microphone input level is too high.
Alphanumeric display
After switching on the transmitter, the alphanumeric display
plays the name of the transmitter. After approx. three seconds, the stan-
dard display appears, indicating the channel bank (1) and the channel (01).
on the display panel and the red LED
capacity approx. 100 %
capacity approx. 70 %
capacity approx. 30 %
LOW BAT (you should immediately replace
the battery pack or the batteries)
first dis-
65