Instructions For Downloading Keys; To Clear All The Keys Downloaded In A Given Mode - THOMSON ROC 850 - AVEC CODES Manual

Instructions for downloading keys

1.
Activate the touch screen by pressing it.
2. Press and hold the
display of the next screen (Setting screen). Release the
3.
4.
5.
6.
7.
Quit by pressing the

To clear all the keys downloaded in a given mode

1.
Activate the touch screen by pressing it.
2. Press and hold the
display of the next screen (Setting screen). Release the
3.
4.
5.
( 6 ) key until the red indicator remains lit (2-3 seconds) and the
SETUP
Press the LEARN key on the touch screen.The MODE screen appears.
Press the mode key desired (
LEARN screen displays.This screen includes the touch keys in the mode
selected, as well as the
Press the touch key or keypad key for which you wish to download the
first key of the original remote control. Use the
touch screen to open the 2nd screen.
Press and hold the key on the original remote control until the red
indicator on the ROC 850 blinks once and the LEARN NEXT screen
appears (this can take 2 to 3 seconds). In case of error, the red indicator
blinks during 3 seconds, but the ROC 850 remains in the learning mode
with the LEARN NEXT screen displayed.To download a new key, press
the key on the touch screen and return to step 5 in the above
LEARN
procedure.To memorize and quit the learning mode, press the
on the touch screen.The Setting screen displays. Learning is complete.
key on the touch screen.
EXIT
( 6 ) key until the red indicator remains lit (2-3 seconds) and the
SETUP
Press and hold the
LEARN
displays.
Press the mode key required (
LEARN screen displays.
Press and hold the
SETUP
the keys downloaded under the mode concerned are then cleared.
Learning a code
key.
SETUP
, , , etc.) on the keypad.The
TV VCR SAT
and keys.
SETUP LEARN
key.
SETUP
key on the touch screen.The MODE screen
, , , etc.) on the keypad.The
TV VCR SAT
6
( ) key until the Setting screen displays. All
17
key on the
SCREEN
key
OK
EN
EN