Learning A Code; Before Starting, Read The Following Tips - THOMSON ROC 850 - AVEC CODES Manual

Learning a code

To recover all the features of one of your original remote controls (e.g. the one supplied with
your TV set), you can download the infrared codes from the original remote control into your
ROC 850.Your ROC 850 can "copy" up to 40 keys per mode.

Before starting, read the following tips:

• Check that the batteries in both remote controls are not used.
• Perform a zero reset of programming before starting this operation (see page 18).This means
that all the parameters in the ROC 850 remote control will be restored to their default value
(factory settings).
• Lay both remote controls as shown in the figure below, and at same horizontal level as the
ROC 850.
• Leave a distance of about 5 cm between both remote controls, while ensuring you are away
from an incandescent or energy saving lamp.
• Perform a test, by downloading 2 or 3 keys and trying them out.Then perform a zero reset
before a full download of all the functions in the original remote control.
• When downloading a key, do not release the key transmitted as long as the screen does not
redisplay and the red indicator remains lit.This can require 2 to 3 seconds.
• No function can be memorized under the
touch screen or the
keys on the keypad.
, ,
SETUP MACRO TV
, ,
SCREEN SLEEP P<P
, , , ,
VCR DVD CBL SAT
3 to 5 cm
3 to 5 cm
16
, keys of the
SEARCH
, , or
CD AUX AUDIO