Identifying Codes Found During Scanning - THOMSON ROC 850 - AVEC CODES Manual

Identifying codes found during scanning

1.
Activate the touch screen by pressing it.
2.
3.
Press the CODE key on the touch screen.The following screen displays (MODE screen).
4.
Press the key (
MODE
control.The next screen appears (CODE screen).
5.
Programming the ROC 850
Press and hold the SETUP
seconds) and the following screen displays (Setting screen). Release the
key.
SETUP
, , ...) on the keypad (
TV VCR SAT
6
Press the ( ) key.The 3 digits of the code memorized appear
SETUP
one after the other.The main screen displays. Identification of the code is
completed. Press the
EXIT
6
( ) key until the red indicator remains lit (2-3
2
) according to the device to
key on the touch screen.
11
EN
EN