Table of Contents
Advertisement
"Display" off status
The display switches off to save en-
ergy; only the Start/Stop sensor
flashes slowly. You can change this
setting.
Changing this setting leads to increased
energy consumption.
– Off
No switching off
– On (10 min.) Not curr.prog.
The display will remain on while the
programme is running but will go out
10 minutes after the end of the pro-
gramme.
– Logo (0 min.) Not curr.prog.
The display will remain on while the
programme is running but the logo
will light up 10 minutes after the end
of the programme.
– Factory default: On after 10 min.
The display is switched off after
10 minutes.
– On (30 min.) Not curr.prog.
The display will remain on while the
programme is running but will go out
30 minutes after the end of the pro-
gramme.
– Logo (30 min.) Not curr.prog.
The display will remain on while the
programme is running but the logo
will light up 30 minutes after the end
of the programme.
– On after 30 min.
The display will go out after
30 minutes.
Supervisor level
"Machine" off status
In order to save energy, the tumble
dryer will switch off automatically after
the end of the programme or if no fur-
ther selection is made. You can
change this setting.
Changing this setting leads to increased
energy consumption.
– No switch off
– Factory default: Switch off after
15 minutes
– Switch off after 20 minutes
– Switch off after 30 minutes
Delay start
The delay start (timer) can be activ-
ated or deactivated.
– Factory default: Off
– On
77
Advertisement
Table of Contents
