Electrical Connection; Technical Data - Smeg SE2320ID Instructions For Fitting And Use

Hide thumbs Also See for SE2320ID:
Table of Contents

Advertisement

Instructions for assembly

Electrical connection

• The electrical connection must be carried out by a qualified
electrician who is authorised to carry out such work!
• Statutory regulations and the connection specifications issued
by the local power supply company must be strictly observed.
• When connecting the appliance it must be ensured that there
is a device which makes it possible to disconnect it from the
mains at all poles with a contact opening width of at least
3 mm. Line-protecting switches, fuses or contactors are
suitable cut-out devices. When connecting and repairing the
appliance disconnect it from the electricity supply with one of
these devices.
• The earth wire must be sufficiently long so that if the strain
relief fails, the live wires of the connecting cable are subjected
to tension before the earth wire.
• Any superfluous cable must be removed from the installation
area beneath the appliance.
• Make sure that the local mains voltage is the same as the
voltage on the rating label.
• The induction hob has been fitted with a temperature-resistant
connection cable in the factory.
• The connection cable must be at least H05 RR-F.
• If the excess cable of this appliance is damaged, it has to be
replaced by the manufacturer, the Customer service of the
manufacturer or by another qualified person to avoid danger.
• Full protection against accidental contact must be ensured on
installation.
• Attention: Incorrect connection may result in the power
electronics unit being destroyed.
Power supply
Mains voltage: 220 - 240V~, 50-60 Hz
Component rated voltage: 230 - 240V
32

Technical data

Dimensions
Hob height/ width/ depth
Cooking zones
rear
Ø cm / kW
front
Ø cm / kW
Hob, total
* Power when the power boost function is activated
Dimensions
Hob height/ width/ depth
Cooking zones
Ø cm / kW 28/ 2.4 (3.7)*
Hob, total
* Power when the power boost function is activated
GB
mm 50 x 300 x 520
21/ 2.3 (3.2)*
14.5/ 1.4 (1.8)*
kW 3.7
mm 50 x 450 x 520
kW 3.7

Advertisement

Table of Contents
loading

Table of Contents