Viewfinder/Lcd Monitor Indications - Panasonic Palmcorder PalmSight Quasar VM-L451 Operating Instructions Manual

Viewfinder/LCD Monitor Indications
Tape remaining and battery charge level Before you begin...
can be displayed. ¢ Connect Camcorder to power source.
1 Set POWER to CAMERA.
2 Press DISPLAY (Initial screen)
repeatedly to select
the following displays.
Fifth press
1X HE bo
REC
Battery Remaining: Tape Remaining:
Kd. (no tape)
FULL n Gal FULL
ha EE
E R
ESA Bal * Tape remaining indicator operates a few
"ft.
RECI) WO LELO Eme! US |
1 Do steps 1 and 2 above to select time/date,
date only, or no display.
ED GO SP
REC
2 Start a recording (page 14).
+ Only the Date and/or Time are recorded.
DEJE OM |
No Indication, except Intelligent Titler (pages 27, 28), will be displayed.
A Set POWER to CAMERA or VCR. cr ON
B Press MENU for MENU mode. : KEY SELECT: PUSH w/a KEY y
Press UP A or DOWN Y to selectie] Fid E: Yi. SPUSA MEW IEY ENO,- -PUSH MENU KEY
[CAMERA MODE] [VCR MODE]
Press DISPLAY to select OFF.
Press MENU to exit.
Press DISPLAY repeatedly to remove time/date.
Indications are restored the next time Camcorder is
turned on.