Editing Onto Another Tape - Sony Video8 Handycam CCD-TP36 Operation Manual

Editing onto Another Tap
You can create your own video program by editing with any other & 8 mm, HiB Hi8, VHS,
SWS S-VHS, VHSC, ech S-VHSC, IMB Betamax or ED Betamax VCR that has
audio/video inputs.
Before Editing
Connect the camcorder to the VCR using the supplied A/V connecting cable (p. 15).
Set the input selector on the VCR to LINE, if available.
(1) While pressing the small green button on the POWER switch, turn it to PLAYER.
(2) Set EDIT to ON in the menu system.
coo. : Signal flow
Starting Editin
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert your recorded tape
into the camcorder.
(2) Play back the recorded tape on the camcorder until you locate the point where you want to start
editing, then set the camcorder in playback pause mode.
(3) On the VCR, locate the recording start point and set the VCR in the recording pause mode.
(4) Press Hl on the camcorder and VCR simultaneously to start editing.
To Edit More Scenes
` Repeat steps 2 to 4.
To Stop Editing
Press O on both the camcorder and the VCR.
Use of the EDITSEARCH button
You can play back the tape in normal/reverse direction by holding down EDITSEARCH during
playback pause mode. You can also play back still pictures successively at specific intervals by pressing
EDITSEARCH intermittently.
Note on the DISPLAY function
If you have displayed the viewfinder screen indicators on the TV, erase the indicators by pressing
30 DISPLAY on the Remote Commander so that they will not be superimposed on the edited tape.