Table of Contents
Advertisement
10
Į Basic Operations
IS
Camera Recording |
Make sure that the power source is installed and a cassette is inserted. The date is automatically
recorded for 10 seconds after you start recording (AUTO DATE feature). This feature works only once a
day.
Before you record one-time events, you may want to make a trial recording to make sure that the
camcorder is working correctly.
(1) While pressing the small green button on the POWER switch, turn it to
CAMERA.
(2) Turn STANDBY up.
(3) Press START/STOP. The camcorder starts recording. The "REC" indicator appears and the red
lamp lights up in the viewfinder. The camera recording /battery lamp also lights up.
=
AUTO DATE
KA
JUL. 4 1995
To Stop Recording Momentarily [a]
Press START/STOP again. The "STBY" indicator appears in the viewfinder (Standby mode).
To Finish Recording [b]
Press START/STOP again. Turn STANDBY down and turn the POWER switch to OFF. Then, eject the
cassette (p. 9).
Advertisement
Table of Contents
