Table of Contents
Advertisement
Checking the Recorded Picture __
Using EDITSEARCH, you can review the last recorded scene or check the recorded picture in the
viewfinder.
(1) While pressing the small green button on the POWER switch, turn it to CAMERA.
(2) Turn STANDBY up.
(3) Press the - (©) side of EDITSEARCH momentarily; the last few seconds of the recorded portion
plays back (Rec Review).
Hold down the — side of EDITSEARCH until the camcorder goes back to the scene you want. The
last recorded portion is played back. To go forward, hold down the + side (Edit Search).
+ EDITSEARCH — ©
CHORD
To Stop Playback
: Release EDITSEARCH.
14
To Begin Re-recording
Press START/STOP. Re-recording begins from the point you released EDITSEARCH. Provided you do
not eject the tape, the transition between the last scene you recorded and the next scene you record will
be smooth.
Advertisement
Table of Contents
