How Do You Change The Bulb; What To Do In Case Of Malfunctions - Smeg FV38X Operating Manual

How do you change the bulb?

What to do in case of malfunctions?

YOU OBSERVE
THAT...
Your display does not
light up.
The bulb doesn't
work anymore.
Water or steam leak
around the door dur-
ing cooking.
In all circumstances, if your efforts are not sufficient,
contact the After-Sales Service Department without delay.
- Turn the bulb cover a quarter turn to the left.
- Unscrew the bulb in the same direction.
Bulb characteristics:
- 15 W -
- 300°C -
- Replace the bulb then reposition the bulb cover,
making sure the joints are correctly positioned.
- Reconnect your oven.
POSSIBLE
CAUSES
Oven is not connect-
ed to power source.
Electronic board is
not functioning.
The bulb is out of or-
der.
The oven is not con-
nected.
Your fuse is out of
order.
The door is not prop-
erly closed.
The door seal is de-
fective.
The bulb is located at the back
right of your oven's cavity.
Isolate the electric supply
before performing any
task on the bulb to avoid the
risk of electric shock.
220-240 V
E 14 socket
WHAT SHOULD
YOU DO?
- Check that the appli-
ance is receiving elec-
tricity (good fuse).
- Call the After-Sales
Service Department.
- Change the bulb.
- Connect the oven.
- Change the fuse.
- Call the After-Sales
Service Department.
GB
101