Table of Contents
Advertisement
22
F. LOWER BLADE GUIDE ASSEMBLY
As with the upper guide assembly, the lower guide assembly should be adjusted to the same
tolerances, that is:
1. Bearing to within 1 /64th of blade back.
2. Guide pin holder to within 1/16" of blade gullets.
3. Pins .002" to -.004" away from blade sides.
Figure 21 Shows location of lower guide adjustment
Figure 22 Shows incorrect guide pin positioning.
4, Adjust guide and secure all adjustment knobs and screws.
5. Make sure blade tracks true. Inspect for any blade deflection by the guides. The bearings
should rotate only under load.
Advertisement
Table of Contents
