Table of Contents
Advertisement
E. UPPER GUIDE ASSEMBLY
The upper blade support bearing (3) should be adjusted to within 1 /64" behind the blade back.
The blade support bearing prevents the blade from being pushed too far back on the wheel. It also
offers the blade rigidity and support during the sawing operation (See Figure 19).
1. Loosen set screw (4) and adjust accordingly. Retighten.
Figure 19 Shows location of set screw for guide adjustment
The guide pin holder (Pt.#7) should be adjusted so the pins are 1/16" behind the gullet line. The
steel pins should be .002" to -.004" away from the blade (See Figure 20).
1. To accomplish this, place two pieces of paper between pins and blade.
2. Lock pins into position and remove paper.
Space .002" — .004"
Figure 20 Shows position of guide pins to blade.
Advertisement
Table of Contents
