Table of Contents
Advertisement
Instructions for the User
Make sure you only use containers intended for induction cooking, with a
thick and completely flat bottom or, if not available, containers without
a curved bottom (concave or convex).
YES
NO
NO
4.1.3 Cookware detector signal
Every cooking zone has a "cookware detector" that only starts the
cooking if there is a well positioned container with the suitable
characteristics present on the hot plate.
If the container is not well positioned or is not made of the correct
material and still tries to activate the hot plate, after a few seconds from
the hotplate's activation, the
symbol will appear on the display.
4.1.4 Residual heat
Each cooking zone is equipped with a residual heat warning device. After
any cooking zone is switched off, a flashing "
" may appear on the
display. This warns that the cooking zone concerned is still very hot.
Cooking can be restarted while the
is flashing; proceed as described
in point "3".
4.1.5 Cooking hob lock
When not in use, the hob can be "locked" from being accidently turned on
by children.
With the hot plates switched off turn simultaneously the hot plate knobs 2
and 3 completely to the left until 5 L appear on the display. Then release
the knobs. To deactivate it, repeat the same procedure: The hot plates'
displays will show a 0 that will indicate that the hot plates' lock has been
deactivated.
49
Hide quick links:
Advertisement
Table of Contents
